Scratches are the number 1 worst enemy of every sports car owner. Especially when you just bought your car. This is the reason why you should always have the Meguiars Scratch Remover. It is by far the best product out there to get rid of those unexpected scratches.
One thing that makes this product so great is its effectiveness. And you can actually expect that since Meguiars has been one of the most trusted brands in car care products. This scratch remover uses advanced scratch removing the technology that can turn any car into a flawless machine.
The most common scratches on your car could be the ones you get from parking lot scruffs or minor accidents. These are the annoying paint transfers, long scratches and the like. They could also be the ones as those fingernail marks and fine blemishes that are quite hard to ignore. All that can be easily removed with the advanced micro abrasive technology used in this product. The micro-abrasive particles work very well in making the surface of your car smooth again. It will not just do a cover-up but totally even out the affected area. And to top it all off, it also has quality restoration qualities to get your car back to its original beauty.
How to Prep Your Car Before Applying Meguiars Scratch X
In order for this product to work properly, it is essential that you do the necessary steps of preparing the surface of the car. This will allow the solution to work its magic on the affected area.
Step 1. Wash your car with a shampoo with a good PH balance. This will remove all the dirt on the surface of that car, thus allowing the solution to penetrate properly.
Step 2. Inspect the affected area and make sure you take care of the rough surfaces. The solution works best when the area is already smooth.
Step 3. Make sure that you are aware of the swirls, water spots and oxidation on the surface of the car before you start the application.
How to Apply in on Your Car
The effectiveness of this product also lies on the proper application of the Meguiars Scratch Remover on the affected area. If you execute this well (it’s not that hard by the way) you can ensure success.
-The first step will be to get a soft microfiber cloth. You should then apply just a small dab of the product on the cloth then proceed to rub it against the grain of the affected area.
-The best way to go will be to make overlapping passes over the affected area while using moderate pressure.
-Once you are done applying, make sure that you wipe off all the excess product.
-The product works best if you apply it under a shade since exposure to sunlight. Exposure to light decreases its effectiveness.
-For best results, repeat the process multiple times.
The Best Value For Your Buck
Meguiars Scratch Remover is without a doubt one of the most effective scratch removers out there. It is also safe and easy to use. This is the reason why a lot of car owners add it to their car maintenance arsenal. And you should too.